Medical and technical gas alarms

3 inputs universal alarm device
- Alarm type programmable for each input (HIGH or LOW priority)
- Reduced dimensions: 3 DIN  MODULES (54mm wide)
-  Alarm programmable to work with contact open or closed
- Built-in silenceable and resettable buzzer. Functional test integrated
- Buzzer status static report outputs, cumulative alarms
- Built-in 24Vdc 0.5A power pack (D5033.1)
- Power 230 Vac (D5033.1) or 24Vac/dc (D5033.2)
10 inputs universal alarm device for medical gas systems.
Complies with EN60601-1 and EN7396-1

- Modbus RTU Protocol standard on all devices
- Alarm type selection (clinical or operative) for each input
- Built-in lack of power visible and audible alarm
- Device configuration to control gas sources (left, right and reserve
   ramps, minimum and maximun  operating pressure)

                            CLICK ON PICTURE FOR MORE DETAILS

Monitoring and alarm unit for medical gases centrals.
Complies with EN60601-1 and EN7396-1

- Intuitive graphic indication for an immediate understanding of the information.
- Modbus protocol standard on all devices.
- Integrated lack of tension acoustic and light alarm
- Different report outputs
                        CLICK ON THE PICTURE FOR FURTHER DETAILS

9 inputs monitoring and alarm unit for medical gases pipelines.
Complies with EN60601-1 and EN7396-1

- Alarms programmable as either clinical or operative.
- Alarm report on BUS by SeleBUS protocol on RS485 standard on this device
- Front panel customizable by means of non-glare adhesive labels
- Message report by bus
                         CLICK ON THE PICTURE FOR FURTHER DETAILS
Repeater on RS485 for eMAS.eVo, eSAR.eVo and GAS9
Optional Card, fitting with all the e- series devices , add a RS485 port with ModBUS (slave) reference, independent from the signal report BUS
Simplified settings with 'rotary dip' - No additional space – insertable also after the installation of the e- series device - portable among the e- series devices.
DISPLAY 0-100% WITH 2 wires INPUT 4/20Ma – 1Ch
Led bar percentage display provided with silenceable acoustic signal
No need of a PC or any other device to proram it.
10 led bars; alarm programmable at 10% or 20%; self-calibration of the maximum and 10 led bars scale
DISPLAY 0-100% WITH 2 wires INPUT 4/20Ma – 2Ch
Led bar percentage display provided with silenceable acoustic signal
No need of using a PC or other devices to program it
10x2 bars; alarm programmable at 10% or 20%; self-calibration of maximum and range self-calibration
ALPHANUMERIC DISPLAY, INPUT 4/20mA 2 or 3 wire
2 programmable alarm tresholds (SET) with correspondinf relay outputs
"Out of order transducer alarm". Optional ModBUS RTU (RS 485)